— Our Services
Electric Boiler Installation
— About This Service
Electric Boiler Installation
Rpk Plumbing and Heating brings 28 years of owner‑run heating experience to electric boiler installations across Telford and within 25 miles. I design systems for new builds, one‑off homes and retrofit projects where gas or oil are impractical. Work includes heat‑loss assessment, electrical supply checks, cylinder or underfloor heating integration, full commissioning and a clear handover. Expect technical competence, tidy installations and practical advice on controls and running strategies.
— Our Process
How It Works
Site survey & system design
A full heat‑loss calculation and hot water assessment plus an electrical capacity check to determine the correct boiler size, cylinder need and controls.
Installation & electrical coordination
I fit the flue‑free boiler, install pumps and controls, connect to your cylinder or underfloor circuits and liaise with your electrician or DNO where supply work is required.
Commissioning & handover
Pressure tests, commissioning, programmer and thermostat setup, and a practical handover with documentation, performance checks and maintenance advice.
— Benefits
Why Choose Electric Boiler Installation?
Owner‑led technical expertise
28 years' practical plumbing and heating experience — systems are designed and installed by the same engineer, ideal for bespoke new builds and one‑off homes.
Neat, low‑impact installations
Electric boilers are compact and flue‑free; installations are tidy, with concealed pipework, smart controls and minimal disruption on site.
Integrated and future‑ready
Systems are sized to work with unvented cylinders, underfloor heating and solar PV/battery setups; I coordinate electrical upgrades to ensure a compliant install.
Why choose an electric boiler? Electric boilers are a reliable alternative where gas or oil aren’t viable — typical examples include flats, off‑gas rural homes and projects where flues or fuel storage aren’t practical. I start every job with a measured heat‑loss survey and hot water demand assessment to select the correct model and identify whether an unvented cylinder, vented cylinder or immersion backup is needed for your property.
Practical installation and handover. Installations include pump sizing, pressure proofing, programmer and thermostat setup, and coordination with your electrician if the consumer unit or incoming fuse needs upgrading. I also advise on running strategies and integration with solar PV or battery systems where suitable, and provide a clear handover so you know how to operate the new system efficiently.
— FAQ
Frequently Asked Questions
They suit properties without gas or oil access, small to medium-sized houses and flats or one‑off homes where flues are impractical. Larger homes with high hot‑water demand may need an unvented cylinder or a hybrid solution; a site survey and heat‑loss calculation will confirm suitability.
Ready to install an electric boiler?
— Other Services